Flexibility from Every Angle
Features
Boschert variable angle notchers offer a unique approach to notching that directly couples the upper and lower blades, a system that guarantees longer blade life compared to other systems. The Vari IV notchers accommodate all angles from 30° to 120° without blade or clearance changes. A 30° upper blade is directly connected to two corresponding lower blades. All notches of more than 30° are accomplished automatically with a right and left notch. Pneumatic power rotates the blades after each stroke.
The Vari IV notchers also offer a 5.9” x 5.9” 90° notching capability with fixed angle front to back cutting. They deliver a 5/32” mild steel (4mm) and 11-gauge stainless steel capacity. The Vari IV notcher’s 39.4-inch wide by 25.6-inch deep table features a milled bed surface, so materials do not float or stick. Blades shift by pneumatic power. Additionally, the Vari IV offers Hi-Carbon, Hi-Chrome blades that overlap on the cutting edge to eliminate blade chipping, a 6.5 horsepower motor, a moveable electric foot pedal and scrap buckets.
The Vari IV notchers can also be configured with a second station on the rear of the table that can be fitted as either a coping station or a punching station.
VARI IV Hydraulic Angle Notcher Features
- 5/32″ mild steel* capacity
- 11 ga. stainless steel** capacity
- 5.9″ x 5.9″ notch
- All Angles from 30° to 120° without blade or clearance changes
- Front to back cutting to hold material against stop
- Milled bed surface for no float or stick operation
- 39.4″ wide by 25.6″ deep table
- Two 30° upper blades working directly with two correpondending lower blaes
- Blades are automatically shifted by pneumatic power
- Hi-Carbon, Hi-Chrome blades that overlap on the cutting edge to eliminate blade chipping
- T-slots and engraved brass scales on the table
- Two heavy duty adjustable stops with 12″ sliding bars
- Engraved brass scales
- Solid-state circuitry with moveable electric foot pedal
- Jog, single or continuous mode
- Ability to notch into the bend of a 90° angle
- Clear view of the blades tips
- 6.5 horsepower drive motor
- Scrap bucket
* mild steel designated as 50,000 psi
** Stainless designated as 75,000 psi
