Single head, rising blade cutting-off machine with automatic cycle, for 90° cutting.
Two model options: Automatic 450 & Automatic ER
Features
AUTOMATICA 450
aluminum and PVC
(Pictured above)
Single-head, rising blade cutting-off machine with automatic cycle only for 90° cutting, equipped with bar feeder with mechanical stop device and adjustment of length and tolerance in cutting down to ± 0,1 mm. The cutting cycle is controlled by a PLC.
- BLADE: Carbide-tipped blade (mm) 450, Swarf conveyor for blade
- BLADE FEED: Hydro-pneumatic
- CUTTING ZONE GUARDS: Full guard, manually operated
- LUBRICATION SYSTEM: Minimum quantity oil lubrication
- CLAMPS: Vertical /horizontal pneumatic clamps for cutting zone with pressure reducing valve and horizontal clamp for feeder zone
- MOTOR: Three-phase brake motor, operating time 10 sec. (kW) 5,5
- PREDISPOSITION FOR SWARF EXHAUSTER: MG
- ACCESSORIES: Manual stop for recovering the workpiece
- FEEDER: Pneumatic (mm) 0 ÷ 800
AUTOMATICA ER
aluminum and PVC
Single head, rising blade cutting-off machine with automatic cycle, for 90° cutting, equipped with N/C bar feeder. It can be set up with four different diameter blades, the blade feed is N/C electrical driven. The machine is provided with a pneumatic system for automatic separation of the cut piece in order to ensure maximum quality of the cut surface. It can be also provided with inverter, to control the blade rotation speed for the best adjustment to the cutting profile. It can also be equipped with an automatic bar loading magazine and with custom drilling units for particular needs.
MACHINE CHARACTERISTICS
- Electronic control of X axis
- X axis travel: 1.000 mm
- X axis positioning speed: 20 m/min
- Absolute encoder positioning
- Positioning tolerance: ± 0.05 mm
- Minimum bar length (bar scrap): 110mm
- Electronic control of Y axis for blade feed
- Carbide-tipped blade
- Blade diameter (mm) 650 / 550 / 450 / 350
- Peripheral speed at 50Hz (m/s) 77 / 83 / 68 / 53
- Separating system for cut workpiece
- Automatic bar loading magazine
- Drilling unit
BLADE MOTOR
- Three-phase brake motor
- Brake operating time(s): 10
- Motor power (kW): 5,5
- Motor with inverter
SAFETY DEVICES AND GUARDS: Manual operated sliding full guard
PROFILE POSITIONING AND CLAMPING
- Bridge framework in the cutting area
- with two pairs of vertical and horizontal clamps with pressure reducer c/w pressure gauge
- Bridge framework in the feeder area
LUBRICATION AND SUCTION
- Coolant system with minimum quantity coolant
- Provision for automatic start, swarf exhauster
