657 Punch Plasma Combo

Piranha-Whitney 657CNC Combination Machine
Affordable Punching & Plasma Cutting

Features

  • Advanced plasma-cutting technology provides highly productive contouring (much faster than laser) with high quality: small kerf angle (vertical cuts), dross-free cutting
  • Additional features such as forming (countersinks, tread plate, louvers), drilling and tapping can be added to eliminate additional downstream operations, allowing parts to be completed in a single operation
  • Labor costs are lower because it takes significantly less time to manufacture parts
  • Faster cycle time – cost of capital per fabricated part is lower because capital costs are amortized over more fabricated parts
  • 40 TON PUNCHING CAPACITY – Punch larger hole sizes in a given material type and thickness, in higher tensile strength and thicker materials
  • Excellent contour definition (achieved due to a minimized “arc lag”)
  • Long consumable life – between 500 and 1200 starts per set of consumables

SPECS

  • PUNCHING FORCE: 40 Tons
  • MAXIMUM PUNCH SIZE: 5.000″
  • PUNCHING HIT RATE: 80 hits per minute
  • X-AXIS TRAVEL: 75.50″
  • Y-AXIS TRAVEL: 49.20″
  • POSITIONING ACCURACY: ±0.005″
  • NOMINAL DISTANCE BETWEEN PUNCH & TORCH (X-AXIS): 15.0″
  • RAPID SPEED PER AXIS: 1,000 in/min
  • PUNCHING STROKE LENGTH: 1.000″
  • MAXIMUM WORKPIECE WEIGHT: 500 lb
  • MINIMUM WORKPIECE THICKNESS: 0.060″
  • MAXIMUM WORKPIECE THICKNESS: 0.500″
  • WORK CLAMP OPENING : 0.625″
  • MINIMUM WORK CLAMP SPREAD: 6.0″
  • MAXIMUM WORK CLAMP SPREAD: 52.0″
  • PLASMA CUTTING SYSTEM: Hypertherm HSD130
  • PLASMA TORCH HEIGHT CONTROL SYSTEM: Hypertherm Sensor PHC

Included as Standard

  • Whitney Positioning / Contouring Control
  • 15” (380mm) Touch screen CNC control
  • Windows XP operating system
  • 32 Gb SSD Hard Drive – available for part program storage
  • 15 Mb maximum part program size
  • Graphics display
  • Integrated parametric shape library
  • RJ45 Ethernet connection for networking and remote diagnostics capability
  • Punching and Forming
  • ‘C’ frame design with open throat
  • Electronic stroke control
  • Positive stripping
  • Pressure switch for forming and marking
  • Manual punch and die locking system
  • 28XX tooling system
  • Slug collection pan
  • Integrated Plasma System and Support Equipment
  • Hypertherm HSD130 plasma cutting system
  • Sensor PHC torch height control
  • Water cooled slag chamber
  • Dust collector and spark trap
  • Hydraulic Work Clamp Assemblies
  • (2) work clamps with variable locations
  • 1,500 PSDI (6.6 kN) clamping force per clamp
  • Replaceable work piece locators
  • Programmable Repositioning Assembly
  • Hydraulic Power Unit, with 15 hp (11kw) motor and hydraulic oil
  • Remote Diagnostics Package
  • Software License for all software resident on the CNC Control