CNC Punching Machines with 360 degree ram rotation
Features
The three configurations of Boschert’s CP-R series punching machines feature 360⁰ ram rotation adding full auto-indexing to every tool, including RevoTool, our multi-tool solution. The seven-way Revotool was especially constructed for this model. In addition to six tools with a diameter of 16 mm each, with a slitting tool of 5 x 30 mm it is possible to punch nearly every contour, allowing complete processing of the sheet without changing tools.
CP Series – CNC Punching Machines
- Maximum sheet length – 32′
- Max. sheet thickness- 1/4″ w/ standard clamps, 1/2″ with special clamps, 1/4″ w/ RevoTool.
- Max. punching force – 36 tons (optional 50 tons)
- Max. workpiece weight – 440lbs.
- Max. punching – Standard hydraulics- 400SPM, High Speed hydraulics- 800SPM
- Max. punch diameter – 4″
- Max. stroke length – 3.54″
- RevoTool positions – 4, 6,7, or 8
- Tool change time, manual 10-15 sec.
- Tool change time, RevoTool 2-4 secs.
- Hydraulic motor – 7.5/15Hp
- Comp. air requirement min. 4.5 bar/65psi
- Hydraulic oil resv. – 115 liter/160 liter high speed
CP-R Series – CNC Punching Machines
- Max. sheet length – 32′
- Max. sheet thickness – 1/4″ w/ standard clamps, 1/2″ w/special clamps, 1/4″ w/ RevoTool clamps
- Max. punch force – 36 tons, Optional (non-rotation only) 50 tons
- Max. workpiece weight – 440 lbs.
- Max punching speed – 400spm w/ standard hydraulics, 800spm w/ High speed (option w/ oil chiller)
- Max. punch diameter – 4″
- Max. stroke length – 3.54″
- RevoTool positions – 4,6,7 or 8
- Tool change time – manual – 10-15 secs., RevoTool – 2-4 secs.
- Hydraulic Motor – 7.5/15Hp
- Comp. air requirement – min 4.5 bar/65psi
- Hydrualic oil resv. – 115 liter/160 liter high speed
MP Series – CNC Punching Machines
- Max. sheet length – 33′
- Max. sheet thickness – 1/2″
- Max. punching force – 36 tons
- max. workpiece weight – 440 lbs
- Max. punch diameter – 4″
- Max. stroke length – 3.5″
- Tool change time – Auto – 5 sec.
- Tool change time – Revo (4,6,7 or 8 tools) 2 sec.
- Prog. Parts Chute size – 8″ x 12″
- Rotation – Full Step-less Rotation – 360 degrees, Rotation Axis speed 45 RPM
- Positioning Accuracy – +/-0.004″
- Repeat-ability – +/-0.001″
- Control – Boschert Graphic w/ RS232
- Type of Drives – AC Digital Servo
- Height of Table Above Floor – 35.4″
- Width of Table (X-axis) – 158″
- Depth of Table (Y-axis) – MP1250 – 63″
